What You’ll Need
You’ll likely need a 4-6 foot analog audio cable with stereo RCA or miniplug jacks. If the TV and stereo system support HDMI connections, then be sure to pick up those cables as well. Once all the tools are available, hook up the speakers to the TV using the appropriate audio cables, and then power on the TV and speakers.
How to Wire Together a TV and Speakers
Clean out the space around the TV to make room for the speakers and allow for some wiggle room to get things situated, and then follow these steps in order.
What to Do If the Speakers Don’t Make Sound
If no sound is heard, first check that the Speaker A/B switch is active. If the switch is disabled, no sound is allowed through to the speaker system. Ideally, the TV should be no further than 4–6 feet away from the stereo receiver, else a longer connection cable will be needed. For analog, the output is often labeled AUDIO OUT and could be two RCA jacks or a single 3.5 mm mini-jack. For digital sound, locate the optical digital output or HDMI OUT port. Any unused analog input is fine, such as VIDEO 1, VIDEO 2, DVD, AUX, or TAPE. Most likely the input on the stereo or home theater receiver is an RCA jack. For digital connections, locate an unused optical digital or HDMI input port. Another area you can check if you don’t hear sound after connecting the speakers to the TV is the TV menu. If your TV has this option, you may need to turn off the internal speakers and turn on the audio output of the television. Your audio system itself might have a pause or mute feature that, if enabled, will stop sound from being relayed through the TV to the speakers. If your TV’s volume is down or off and the stereo system’s volume is muted, it can appear as though something is broken when really you just have to un-mute one or both devices. Surround sound speakers that support Bluetooth might connect to a nearby phone during the setup process (this can happen by accident during setup as you’re clicking buttons). If you think this might be why the speakers aren’t playing any sound from the TV, restart the speaker system and temporarily disable Bluetooth on any nearby devices. If anything, plugging in the audio cables might be the only step you’re positive you did correctly, but even that can not always work the first time around. Some cables can be pressed in just enough to be held in place but not far enough to actually work properly. Re-check all the cables by unplugging them and pressing harder this time to be sure they snap into place. If the volume of the speakers is turned up, properly attaching the audio cables should make a sound.
